Hydrogen storage properties of Zr2Co crystalline and amorphous alloys

To further explore the application feasibility of Zr₂Co alloy in tritium-related fields, hydrogenation/dehydrogenation properties of this material of crystalline or amorphous structure, prepared by arc melting or melt spinning, were studied by pressure-composition temperature measurement, X-ray diffraction, differential scanning calorimeter, thermal desorption spectroscopy. It was found that the two kinds of Zr₂Co alloys can absorb hydrogen in a close full concentration of ~9 mmol/g, and may have similar equilibrium hydrogen pressure in the order of 10^?6 Pa at room temperature. In their hydrogenated samples various hydrides were observed to form, including ZrH₂, Zr₂CoH₅, ZrCoH₃ and an amorphous one with gradually decreasing general thermostability. The amorphous alloy exhibited easier hydrogen induced disproportionation caused by highly stable ZrH₂ and much slower hydrogen absorption kinetics. This disproportionation behavior of the crystalline alloy was found to be entirely suppressed by changing heating process. The results firmly indicate that crystalline Zr₂Co alloy could be more favorable for tritium treatment due to very low equilibrium pressure and the feasibility of eliminating the disproportionation.     

模数式桥梁伸缩装置疲劳试样尺度研究

为了研究模数式桥梁伸缩装置采用单跨试样代替三跨试样进行疲劳试验的可行性,首先采用力学简化模型对伸缩装置主要构件两种受力情况进行分析,再利用Ansys分析软件分别建立了整体加强320伸缩装置单跨试样与三跨试样的有限元模型,对伸缩装置进行强度对比分析。结果表明:在同种加载情况下,单跨模型中梁最大应力较多跨模型大,而多跨模型中梁支座处最大应力大于单跨模型。由于中梁支座处最大应力以压应力为主,故单跨模型较多跨模型受力严重。若以单跨试样进行疲劳试验,则试验结果偏于安全。最后对该型号伸缩装置单跨试样进行了承载力试验及疲劳试验。试验结果表明,单跨模型危险点处计算应力与试样对应位置处测得应力吻合良好,该型号伸缩装置整体疲劳性能达到要求。本研究表明,在进行模数式桥梁伸缩装置疲劳试验时,若试验条件受限,可以考虑采用单跨试样代替三跨试样进行疲劳性能试验。     

安徽地区汉族心血管疾病患者SLCO1B1与ApoE基因多态性分布及其在他汀类药物临床个体化应用中的意义

目的：探讨脂质及药物代谢相关基因SLCO1B1和ApoE的基因多态性在安徽地区汉族心血管疾病患者中的分布，以评估他汀类药物个体化用药的效益/风险比。方法：利用PCR-荧光探针法技术检测2019年1月至2020年8月合肥市第二人民医院736例心血管疾病患者外周血基因组中SLCO1B1基因的rs2306283（388A>G）和rs4149056（521T>C）位点和ApoE基因的rs429358（388T>C）和rs7412（526C>T）位点的基因多态性分布特点，并与已报道的中国其他地区汉族心血管疾病患者的数据进行比较，分析不同地区间的基因型分布差异。结果：检测到安徽地区汉族心血管疾病患者中SLCO1B1基因型有6种，分别为*1a/*1a型（6.11%）、*1a/*1b型（29.08%）、*1b/*1b型（44.57%）、*1a/*15型（4.08%）、*1b/*15型（15.49%）、*15/*15型（0.68%），未检测到*1a/*5型、*5/*5型和*5/*15型；ApoE基因有6种表型，分别为E2/E2型（0.41%）、E2/E3型（11.96%）、E2/E4型（1.09%）、E3/E3型（67.66%）、E3/E4型（17.93%）、E4/E4型（0.95%）。两种基因的基因多态性频率分布满足Hardy-Weinberg遗传平衡，具有群体代表性。本研究人群中携带SLCO1B1正常肌病风险型的比例最高，约占79.76%；SLCO1B1中度肌病风险型和高度肌病风险型的人群比例较低，分别为19.57%和0.68%。ApoE大众类基因型比例最高，约占68.75%；ApoE保护类基因型及风险类基因型的人群比例分别为12.37%和18.88%。不同性别间SLCO1B1和ApoE基因表型患者差异无统计学意义。与华南地区心血管疾病患者相比，安徽地区ApoE基因多态性分布差异有统计学意义（P<0.05）。结论：安徽地区736例心血管疾病患者SLCO1B1和ApoE基因型分别以他汀药物剂量耐受性较高的正常肌病风险型和对他汀药物敏感的大众类基因型为主，服用他汀类药物诱发肌病的风险较低，降脂疗效较好；且两种基因的多态性分布均不受性别的影响，但ApoE基因多态性分布特征可能在地域上存在差异。因此，检测SLCO1B1和APOE基因多态性对于临床评估效益/风险比有重要的指导意义。     

分子筛负载有机磷酸酯成核体系对聚丙烯性能的影响研究

采用溶液浸渍法制备了不同分子筛负载有机磷酸酯（MBP）成核体系，研究其对等规聚丙烯（iPP）结晶性能和力学性能的影响，并通过扫描电子显微镜观察不同分子筛对MBP的分散情况，进而揭示不同分子筛负载MBP对iPP成核性能提升差异的原因。结果表明，B类分子筛?1和B类分子筛-2负载MBP对iPP性能影响有限。而A类分子筛-1和A类分子筛-2负载MBP成核体系对iPP的性能提升明显：不仅促使iPP的结晶温度分别提高了10 ℃和6 ℃；也在促使iPP的弯曲模量分别提高29.9 %和13.0 %的同时，使得其冲击强度分别提升8 %和7 %，起到了有效的刚韧平衡的作用。成核体系的SEM结果表明，A类分子筛-1的加入能有效分散MBP，从而促使其在iPP当中发挥成核性能；而B类分子筛?1本身团聚严重，无法很好地分散MBP，因此无法发挥提升iPP成核性能的作用。     

基于改进MobileFaceNet的人脸识别方法北大核心

针对目前大多数人脸识别算法参数多、计算量大,难以部署到移动端和嵌入式设备中的问题,提出了一种基于改进MobileFaceNet的人脸识别方法。通过对MobileFaceNet模型结构的调整,将bottleneck模块优化为sandglass模块,改良深度卷积和逐点卷积的相对位置,适当增大sandglass模块的输出通道数,从而减少特征压缩时的信息丢失,增强人脸空间特征的提取。实验结果表明:改进后的方法在LFW测试数据集上准确率达99.15%,模型大小和计算量分别仅为原算法的61%和45%,验证了所提方法的有效性。     

寒区引水隧洞保温层设置比选及保温效果研究

为了研究寒区引水隧洞开挖完成后保温层的设置方式及保温效果的问题,以新疆某寒区引水隧洞为依托,通过有限元数值模拟研究了引水隧洞保温层的设置方式、设计厚度参数的比选.结果表明:寒区引水隧洞保温层设置在二衬表面的效果优于设置在初衬与二衬之间的,保温层设置在二衬表面;随着保温层、衬砌厚度增加,对应围岩的温度逐渐升高,厚度与温度呈线性相关.该研究结果可以提高引水隧洞的保温效果,同时节约材料成本,可为相关工程设计提供参考.     

用土力学的新概念解读和修正经典饱和土力学

论述了应该用有效应力的新概念代替经典有效应力原理。总应力压缩模量与渗流水等效压缩模量的曲线相似;有效应力压缩模量起加劲作用,而不是起决定性作用。土的压缩变形计算中应用有效应力原理是错误的。对于起始水力坡降,引入饱和粘性土的自由水压力衰减概念。在饱和粘性土中,自由水通道率折减不大,相对自由水压力通过一定厚度后衰减为零。所以,新概念土力学的算法接近我国规范:"对粘性土宜按水土合算计算"。还解读了地下室浮力折减、流沙陷阱等等。     

镁合金植酸转化膜的制备及其性能的研究

采用化学转化方法在AZ91D镁合金表面制备一种环境友好型的植酸转化膜。通过对pH值、温度、反应时间、植酸的质量分数等因素的控制,进行单因素实验和正交实验。确定的最佳工艺条件为:植酸3%,NaF 3g/L,H3BO340g/L,Ce(NO3)3·6H2O 5g/L,pH值4.5。采用优化后的工艺,能够在镁合金基体表面获得宏观上淡灰、致密,微观上具有微细裂纹的膜层。XRD测试表明:该植酸转化膜的主要成分为MgH10O24P6和CeO2。耐蚀性测试表明:植酸转化膜能有效地提高镁合金的耐蚀性。     

Acrylate–vinylidene chloride copolymers derived from corresponding water‐borne latexes: Influence of acrylate units on their potential as heavy‐duty anticorrosive coating materials

A series of aqueous latexes with solid contents of 56%–59% were synthesized by binary emulsion copolymerization of vinylidene chloride (VDC) with an acrylate, namely methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), hexyl acrylate (HA), or 2‐ethylhexyl acrylate (EHA). Differential scanning calorimetry (DSC) and Fourier‐transform infrared (FTIR) spectroscopy showed that the acrylate units with short ester side‐chains, such as MA and EA, made the copolymers hard and the crystallization tendency of their PVDC segments was reduced. Hydrophobic acrylates with relatively long ester groups, such as HA and EHA, gave flexible copolymers, and favored the crystallization of their PVDC segments. BA endowed the copolymers with medium flexibility and crystallization tendency. As coating materials, the copolymers bearing MA and EA adhered poorly to the tinplate before or after 100 hr of salt‐spray corrosion, whereas those bearing BA, HA, or EHA showed good adhesion to tinplate when they had little or no crystallinity. After 100 hr of salt‐spray corrosion, only BA–VDC80, containing 80% VDC, retained both excellent adhesion to metal and excellent barrier performance. Further study demonstrated that BA–VDC80 could protect tinplate from rusting for at least 250 hr under harsh salt‐spray corrosion. Scanning electron microscopy, FTIR‐attenuated total reflectance spectroscopy and DSC were used to evaluate the corroded BA–VDC80 film. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40192.     

A Nanochannel Platform for Single DNA Studies: From Crowding,Protein DNA Interaction,to Sequencing of Genomic Information

The study of nanochannel-confined DNA is important from biotechnological and biophysical points of view. We produce nanochannels in elastomer with soft lithography and proton beam writing. Issues concerning DNA confined in such quasi one-dimensional channels are discussed. We describe DNA stretching via the control of channel diameter and buffer conditions and how the extension can be interpreted with theory and computer simulation. We then discuss the conformation of nano-confined DNA crowded by neutral polymers and like-charged proteins. As an example of a protein that has an affinity to DNA, the effect of heat-stable nucleoid-structuring protein, H-NS, on the folding and compaction of DNA is reviewed. Compaction of DNA by eukaryotic protamine and unpacking of pre-compacted DNA through an increase in salt concentration are discussed. We review results obtained with a novel, cross-channel device that allows the monitoring of the dynamic, conformational response of DNA after exposure to a ligand or protein and/or a change in buffer conditions in situ. As a biotechnological application, linearization of DNA by bottlebrush coating with a polypeptide copolymer is discussed. It is demonstrated that large-scale genomic organization can be sequenced using single DNA molecules on an array of elastomeric nanochannels. Overall, our results show that the effects of ligands and proteins on the conformation, folding, and condensation of DNA are not only related to classical controlling factors, such as osmotic pressure, charge, and binding, but that the interplay with confinement in a nanospace is of paramount importance.